Table of Contents
Advertisement
8. Setting of menu items
BAR ID
This menu is used to set the bar ID that is displayed on the
colour bars.
When the cursor is brought to the "BAR ID" menu title and
the jog dial is pressed, the display returns to the Operation
menu at the next hierarchical level above.
> BAR ID >
BAR ID SW
Brightness
ID1 POS
>>>>>>>>>>>>>>>>
ID1
ID2 POS
>>>>>>>>>>>>>>>>
ID2
Offset
p BAR ID SW: Bar ID display setting
Select this to set the display of the bar IDs to be
displayed on the colour bars when the colour bars are
displayed to ON or OFF.
Selection options: ON, OFF
p Brightness: Bar ID character colour
Set the character colour, in units of 10 %, of the bar
ID displayed on the colour bar when the colour bar is
displayed.
Selection options: 0% (black) to 100% (white)
p ID1 POS: Bar ID1 display position setting
ID2 POS: Bar ID2 display position setting
Select these to set the display start position of the bar
IDs displayed on the colour bars when the colour bars are
displayed.
The setting determines from which line and from which
row, starting from the top left of the colour bars, the
display of the bar IDs is to start, as referenced to the font
size.
When the coordinates of ID1 and ID2 are the same, bar
ID1's character string will overlap bar ID2 (bar ID2 will be
below).
When the lines are the same and the rows differ, the bar
ID with the line start position set later will overlap.
Selection options: Line number = 0 to 5
Row number = 0 to 15
When the cursor is moved to the line
number of ID1 POS
> BAR ID >
BAR ID SW
Brightness
ID1 POS
>>>>>>>>>>>>>>>>
ID1
ID2 POS
>>>>>>>>>>>>>>>>
ID2
Offset
OFF
100%
(
0,
0)
(
1,
0)
(
0,
0)
OFF
100%
(
1,
1)
(
1,
2)
(
0,
0)
Be sure to ask your dealer to carry out the operations described in
this chapter for you.
When the jog dial is pressed
> BAR ID >
BAR ID SW
Brightness
ID1 POS
ID1
ID2 POS
ID2
Offset
When the coordinates are set and the jog
dial is pressed
> BAR ID >
BAR ID SW
Brightness
ID1 POS
ID1
ID2 POS
ID2
Offset
When the cursor is brought to the position
of the ID1 POS row number and the value
is set in the same way
> BAR ID >
BAR ID SW
Brightness
ID1 POS
ID1
ID2 POS
ID2
Offset
p ID1: Bar ID1 character setting
ID2: Bar ID2 character setting
Select these to set the character strings of the bar ID1
and bar ID2.
The IDs that are set here are displayed on the colour
bars.
Up to 16 characters can be set for ID1 and ID2.
When "##" has been input in the character string, this
part is replaced by the camera number (1 to 15) and
displayed.
p Offset:
Bar ID display position fine adjustment
The display positions of the bar IDs can be finely adjusted
within the font size range.
Using the top left of the font as the origin point, set the
horizontal offset and vertical offset.
Selection options: Horizontal = 0 to 89
Vertical = 0 to 79
56
OFF
100%
(
1,
1)
>>>>>>>>>>>>>>>>
(
1,
2)
>>>>>>>>>>>>>>>>
(
0,
0)
OFF
100%
(
5,
1)
>>>>>>>>>>>>>>>>
(
1,
2)
>>>>>>>>>>>>>>>>
(
0,
0)
OFF
100%
(
5,
7)
>>>>>>>>>>>>>>>>
(
1,
2)
>>>>>>>>>>>>>>>>
(
0,
0)
Hide quick links:
Advertisement
Table of Contents
