Panasonic AK-HCU3550EA Operating Instructions Manual page 64

8. Setting of menu items
Version
This menu is used to display the application software and
FPGA versions.
When the cursor is brought to the "Version" menu title
and the jog dial is pressed, the display returns to the
Maintenance menu at the next hierarchical level above.
> Version >
SOFT XX0.00-00-0.00
FPGA1 XX0.00-00-0.00
FPGA2 XX0.00-00-0.00
FPGA3 XX0.00-00-0.00
p SOFT
Select this to display the version of the software installed
in the unit.
p FPGA1, FPGA2, FPGA3
Select these to display the versions of the programmes
installed in the unit.
Be sure to ask your dealer to carry out the operations described in
this chapter for you.
PM View Setting
This menu is used to set ON or OFF for the items (iris,
status display) to be displayed on the picture monitor.
When the cursor is brought to the "PM View Setting" menu
title and the jog dial is pressed, the display returns to the
Maintenance menu at the next hierarchical level above.
> PM View Setting >
CAMERA No
CAM Mode
Iris
Iris Level
Scene File No
Shutter
ND/CC Filter
Gain
p CAMERA No: Camera number display setting
Select this to set ON or OFF for the camera number
display.
Selection options: ON, OFF
p CAM Mode: Camera format display setting
Set the format display ON or OFF for the signal output
from the camera.
Selection options: ON, OFF
p Iris: Iris display setting
Select this to set ON or OFF for the iris f-value display.
Selection options: ON, OFF
p Iris Level: Iris level bar display setting
Select this to set ON or OFF for the iris level bar display.
Selection options: ON, OFF
When OFF is selected, the iris display screen does not
appear on the picture monitor.
p Scene File No:
Display setting for number of scene file being loaded
Select this to set ON or OFF for the scene file number
display.
Selection options: ON, OFF
p Shutter: Shutter ON/OFF status display setting
Select this to set ON or OFF for the shutter speed display.
Selection options: ON, OFF
p ND/CC Filter: Filter status display setting
Select this to set ON or OFF for the ND/CC filter status
display.
Selection options: ON, OFF
p Gain: Gain display setting
Select this to set ON or OFF for the gain display.
Selection options: ON, OFF
64
ON
OFF
ON
ON
ON
ON
ON
ON