Bar Id; Display: Bar Id Display Setting; Brightness: Bar Id Character Colour - Panasonic AK-HCU3550EA Operating Instructions Manual

5. Web settings

BAR ID

The settings for the bar ID to be displayed on the colour bars are performed on this screen.
p Display: Bar ID display setting
Select this to set the display of the bar IDs to be
displayed on the colour bars when the colour bars are
displayed to ON or OFF.
Selection options: ON, OFF
p Brightness: Bar ID character colour
Set the character colour, in units of 10 %, of the bar
ID displayed on the colour bar when the colour bar is
displayed.
Selection options: 0% (black) to 100% (white)
p ID 1 Setting Position: Bar ID1 display position setting
Select this to set the display start position of the bar ID
displayed on the colour bars when the colour bars are
displayed.
The setting determines from which line and from which
row, starting from the top left of the colour bars, the
display of the bar ID is to start, as referenced to the font
size.
When the coordinates of ID1 and ID2 are the same, bar
ID1's character string will overlap bar ID2 (bar ID2 will be
below).
When the lines are the same and the rows differ, the bar
ID with the line start position set later will overlap.
Selection options: Line number = 0 to 5
Row number = 0 to 15
p ID 1 Setting Character: Bar ID1 character setting
Select this to set the character strings of the bar ID1.
The ID that is set here is displayed on the colour bars.
Up to 16 characters can be set for ID1.
When "##" has been input in the character string, this
part is replaced by the camera number (1 to 15) and
displayed.
p ID 2 Setting Position: Bar ID2 display position setting
Select this to set the display start position of the bar ID
displayed on the colour bars when the colour bars are
displayed.
The setting determines from which line and from which
row, starting from the top left of the colour bars, the
display of the bar ID is to start, as referenced to the font
size.
When the coordinates of ID1 and ID2 are the same, bar
ID1's character string will overlap bar ID2 (bar ID2 will be
below).
When the lines are the same and the rows differ, the bar
ID with the line start position set later will overlap.
Selection options: Line number = 0 to 5
Row number = 0 to 15
p ID 2 Setting Character: Bar ID2 character setting
Select this to set the character strings of the bar ID2.
The ID that is set here is displayed on the colour bars.
Up to 16 characters can be set for ID2.
When "##" has been input in the character string, this
part is replaced by the camera number (1 to 15) and
displayed.
p Offset: Bar ID display position fine adjustment
The display positions of the bar IDs can be finely adjusted
within the font size range.
Using the top left of the font as the origin point, set the
horizontal offset and vertical offset.
Selection options: Horizontal = 0 to 89
Vertical = 0 to 79
33