Output - Panasonic AK-HCU3550EA Operating Instructions Manual

4. Picture monitor (PM) displays
p CC Filter: CC filter names
The names of the CC filters are displayed here.
The names (each consisting of 4 characters) correspond
to filters A, B, C, D and E.
) Displayed as the filter names are the names that were
set using the unit's menu.
p Lens EXT: Lens extender magnification
The magnification of the lens extender is displayed here.
Display range: 0.8, 1.0, 2.0
p Auto Iris: Auto iris status
The status of the auto iris function is displayed here.
Display range: OFF, ON
p Scene File: Scene file information
The selected scene file is displayed here.
Display range: OFF, SCENE1 to SCENE8
p SD DTL: SD detail status
The status of the detail function for the SD signals is
displayed here.
Display range: OFF, ON
p SD Skin DTL: SD skin tone detail status
The status of the skin tone detail function for the SD
signals is displayed here.
Display range: OFF, ON
Status displays (page 3 of 5)
On the status display (page 2 of 5) screen, press the
character switch on the operation panel of the ROP or MSU
to display the third page of the status displays.
3/5 -Status3-
2D LPF
COMB Filter
D/C Mode
U/C Mode
RET1
RET2
RET3
RET4
Sync Out
ASU REF
ASU Mode
p 2D LPF: 2D low-pass filter status
The status of the 2D low-pass filter is displayed here.
Display range: OFF, ON
p COMB Filter: Comb filter mode
The comb filter mode is displayed here.
Display range: LOW, MID, HIGH
OFF
OFF
SQ
SQ
HD SDI1
HD SDI2
HD SDI3
HD SDI4
HD
FACTORY
FULL
17
p D/C Mode: Down-conversion system
The setting information of the down-conversion system is
displayed here.
Display range: SP, SQ, LB,
LINK (corresponds to external setting)
p U/C Mode: Up-conversion system
The setting information of the up-conversion system is
displayed here.
Display range: SP, SQ, LB,
LINK (corresponds to external setting)
p RET1, RET2, RET3, RET4:
SDI return signal input formats
The statuses of the input format allocations for SDI return
signals 1 to 4 are displayed here.
Display range: HD SDI1 to 4, SD SDI1 to 4
p Sync Out: Sync output allocation status
The allocation of the sync output is displayed here.
Display range: HD, SD
p ASU REF:
Auto setup reference file information
The reference file used during auto setup is displayed
here.
Display range: FACTORY, USER1, USER2, USER3
p ASU Mode: Auto setup mode
The auto setup mode is displayed here.
Display range: FULL, EASY
Status displays (page 4 of 5)
On the status display (page 3 of 5) screen, press the
character switch on the operation panel of the ROP or MSU
to display the fourth page of the status displays.
4/5 -Status4-
CAM Type
CAM Mode
CCU Mode
1080/59.94i(60i)
Incom System ENG
Incom System PROD RTS
Hours CAM
Hours CCU
p CAM Type: Camera type information
The type of camera is displayed here.
Display range: STUDIO, HANDY, B/U, CRANE
HANDY
59.94i
RTS
123456H
78901H