Panasonic AK-HCU3550EA Operating Instructions Manual page 65

8. Setting of menu items
PM Operation STAT
This menu is used to set ON or OFF for the operation items
to be displayed on the picture monitor.
When the cursor is brought to the "PM Operation STAT"
menu title and the jog dial is pressed, the display returns to
the Maintenance menu at the next hierarchical level above.
> PM Operation STAT >
Status Disp Time
Manual Ope Status
Master Gain
Shutter
Lens EXT
Filter
Scene File
REF LOAD
Auto OPE Status
p Status Disp Time: Status display time setting
Select this to set the length of the status display time.
The time is set in 1-second increments.
When the status of an item that has been set to ON on
this menu has changed, the new status is displayed on
the picture monitor for the length of time that was set for
Status Disp Time.
Selection options: 0, 2, 4
When 0 (zero) is selected, the operations (manual, auto)
are not displayed on the picture monitor.
p Manual Ope Status
Master Gain: Master Gain display setting
Select this to set ON or OFF for the status display when
the master gain status has been changed.
Selection options: ON, OFF
p Manual Ope Status
Shutter: Shutter display setting
Select this to set ON or OFF for the status display when
the shutter status has been changed.
Selection options: ON, OFF
p Manual Ope Status
Lens EXT: Lens EXT display setting
Select this to set ON or OFF for the status display when
the lens extender status has been changed.
Selection options: ON, OFF
Be sure to ask your dealer to carry out the operations described in
this chapter for you.
p Manual Ope Status
p Manual Ope Status
4
ON
ON
ON
p Manual Ope Status
ON
ON
ON
ON
p Auto OPE Status: Auto function display setting
System
This is used to initialize the menu settings.
When the cursor is brought to the "System" menu title
and the jog dial is pressed, the display returns to the
Maintenance menu at the next hierarchical level above.
p Initialize
65
Filter: Filter display setting
Select this to set ON or OFF for the status display when
the filter status has been changed.
Selection options: ON, OFF
Scene File: Scene File display setting
Select this to set ON or OFF for the status display when
the scene file status has been changed.
Selection options: ON, OFF
REF LOAD: REF LOAD display setting
Select this to set ON or OFF for the status display when
REF LOAD has been read.
Selection options: ON, OFF
Select this to set ON or OFF for the status display when
AWB, ABB or ASU has been executed.
Selection options: ON, OFF
> System >
Initialize
The menu settings can be returned here to the factory
settings using this item.
Selection options: NO?, YES?
After selecting "Initialize", turn the jog dial to select
"YES?", and then press the jog dial to initialize the
settings.
) The settings of the "Date/Time", "Network" and
"Version" menus are not initialized.
NO?