Operation Displays (Manual) - Panasonic AK-HCU3550EA Operating Instructions Manual

4. Picture monitor (PM) displays

Operation displays (manual)

The operation displays appear at the bottom of the screen for 4 seconds when any of the corresponding operations have been
performed by the operation panel of the ROP or MSU.
p When the master gain level setting is changed
p When the shutter speed setting is changed
p When the lens extender setting is changed
p When the filter setting is changed
p When the scene file setting is changed
p When the REF LOAD setting is changed
The display time can be changed using menu "Maintenance" £ "PM Operation STAT" £ "Status Disp Time".
No. Display item
1 Master Gain
2 Shutter
3 Lens EXT
4 Filter
5 Scene File
6 REF LOAD
Filter >>>>/>>>>
Description
This indicates the master gain level setting.
Display: "Master Gain @@@dB"
This indicates the speed of the electronic shutter.
This indicates the magnification of the lens extender.
Display: "Lens EXT @@@"
p Where "@@@" is 1), 2) or 3) below
1) "0.8" is indicated when LENS M 0.8 ON is set.
2) "2.0" is indicated when LENS M 2.0 ON is set.
3) "1.0" is indicated when a setting other than 1) or 2) has
been selected.
This indicates the names of the ND filters and CC filters.
Display: "ND filter names/CC filter names"
This indicates the scene file name.
This indicates the reference file that was loaded using the
SCENE command.
Display: "REF LOAD @@@"
19
Display range
–6 dB to +36 dB
(in 3 dB increments)
OFF,
60 to 2000
(SYNCHRO: 51.5 to 6250)
0.8, 1.0, 2.0
4 characters for each name
SCENE1 to 8, OFF
FACTORY (0x0F)
USER1 (0x0E)
USER2 (0x0D)
USER3 (0x0C)