Operation Displays (Auto) - Panasonic AK-HCU3550EA Operating Instructions Manual

4. Picture monitor (PM) displays

Operation displays (AUTO)

If the AWB function, ABB function or AUTO SETUP function has been activated when a menu is not displayed on the picture
monitor, information on the operation performed appears at the bottom of the screen.
When the AUTO SETUP operations are displayed, they will remain displayed until the operations are completed.
The display is cleared 4 seconds after the operations are completed.
If the operations cannot be completed, they will remain displayed until the NG items of the AUTO function are released.
The display time can be changed using menu "Maintenance" £ "PM Operation STAT" £ "Status Disp Time".
No.
1 ABB Start
2 AWB Start
AUTO OK
3
(Common to ABB, AWB and AUTO SETUP)
AUTO NG
4
(Only for ABB and AWB)
5 AUTO SETUP Start
AUTO NG
6
(Only for AUTO SETUP)
AUTO BREAK
7
(Common to ABB, AWB and AUTO SETUP)
AUTO READY
8
(Only for AUTO SETUP)
AUTO SETUP:ACTIVE
GAMMA OPERATION
Display item
Note 1
Note 2
Note 3
Display description:
Appears on two lines at the bottom of the screen.
Top line: Status
Bottom line: Detailed information
ABB: ACTIVE
(None)
AWB: ACTIVE
(None)
ABB: OK AWB: OK
(None)
ABB: NG
p NG detailed information is displayed here.
AUTO SETUP: ACTIVE
p Detailed information is displayed here.
AUTO SETUP: NG
p NG detailed information is displayed here.
ABB: BREAK AWB: BREAK
(None)
AUTO SETUP: READY
(None)
20
AUTO SETUP: OK
AWB: NG
Note 1
Note 2
Note 3
AUTO SETUP: BREAK