Caution For Ac Mains Lead; How To Replace The Fuse - Panasonic AK-HCU3550EA Operating Instructions Manual

Camera control unit
Table of Contents

Advertisement

For your safety
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and the other one is only for
U.K.
Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable.
FOR CONTINENTAL EUROPE, ETC.
Not to be used in the U.K.
FOR U.K. ONLY
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 13 amps and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark ¨ or the BSI mark © on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until
a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician.
WARNING: This apparatus must be earthed.
IMPORTANT
The wires in this mains lead are coloured in accordance
with the following code.
Green-and-Yellow:
Blue:
Brown:
indicates safety information.

Caution for AC Mains Lead

Earth
Neutral
Live
FOR U.K. ONLY
As the colours of the wire in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
• The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked
with the letter E or by the earth symbol ª or coloured
green or green-and-yellow.
• The wire which is coloured blue must be connected to
the terminal in the plug which is marked with the letter N
or coloured black.
• The wire which is coloured brown must be connected to
the terminal in the plug which is marked with the letter L
or coloured red.

How to replace the fuse

1. Open the fuse compartment with a screwdriver.
2. Replace the fuse.
3
Fuse

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents