Configure The Scan Job Export Function - Oce 2090 User Manual

Configure the scan job export function

Introduction
Task for system administrators
When you scan an analogue document on the Océ VarioPrint 2090 , the
document is exported to and saved on the scan server. The connection to the
scan server is established through a scan job export. If the scan-to-file function
is active, you must enable the 'Job export' setting.
The capacity of the export buffer is limited. The situation can occur that the
maximum capacity of the export buffer is reached. The Océ VarioPrint 2090
displays an error message when the export buffer is full.
The export buffer keeps the jobs for 48 hours. After 48 hours, the jobs are
deleted.
When to do
In some maintenance or error situations, there must be an option to disable the
scan job export function. For example when you must reset scan server settings
or network settings. You can put the export of scan jobs on hold. The scan jobs
remain in the export buffer.
Before you begin
Start the Océ Settings Editor in your web browser in the system administrator
mode.
The scan function 131