Oce 2090 User Manual page 105

The settings in the 'Extra' section
[35] The 'Extra' section without 'Sort' option
[35] The 'Extra' section without 'Sort' option
[36] The 'Extra' section with 'Sort' option
[36] The 'Extra' section with 'Sort' option
The following table describes the settings.
[32] The settings in the 'Extra' section
Settings
'Sort'
'Orientation'
The copy function
Description
'By page'. The output is sorted in the order 111, 222,
333.
'By set'. The output is sorted in the order 123, 123,
123.
The setting is only visible when the key operator
Note:
enables the setting 'Display expert settings' in the Océ
Settings Editor. When the setting is enabled, the 'Extra'
section contains 5 settings. Then the graphical feedback
at the left-hand side is not visible.
You can use the setting when you scan the original from
the glass plate and the original is small enough to make
a scan in 2 directions (A3 can only be scanned in 1
direction on the glass plate).
This setting is read-only for the originals that you
Note:
put in the automatic document feeder.
105