Oce 2090 User Manual page 104

Settings
'Layout'
'Copy document
type'
[31] The settings in the 'Layout' section
104 Océ VarioPrint 2090 User manual
Description
The setting allows you to print more than 1 image on a
sheet.
You have the following options.
'Booklet'
The system prints 2 images per sheet. The system
automatically prints your job 2-sided. The system
shuffles the pages so that a booklet is created when
you fold the copies.
'2-up'
The system prints 2 images per sheet. When you
select '1-sided', the next 2 images are printed on a new
sheet. When you select '2-sided', the next 2 images are
printed on the rear of the sheet.
'Normal'
Your job is copied with no special layout settings.
When you select 'Booklet' or '2-up' the system
Note:
copies the images, when possible, 1:1. For example,
when you copy A4 originals, the images are printed on
A3.
The setting allows you to select the binding edge of the
copies. A figure at the left-hand side of the operator
panel displays the result after you select a value for a
particular binding edge.
You have the following options.
The portrait copy turns on the long edge.
The landscape copy turns on the short edge.
The portrait copy turns on the short edge.
The landscape copy turns on the long edge.
It can occur that the original document type and
Note:
the copy document type that you select, have a different
content orientation. For example, the original is a
portrait document and the copy is a landscape
document. When this situation occurs, the system resizes
the information on the portrait original to fit on the
landscape copy.