Oce 2090 User Manual page 84

Illustration
[20] Edit a mailbox job
[20] Edit a mailbox job
How to edit a mailbox job
Open the mailbox to access your print job (see 'Print a job from the mailbox'
1
on page 81).
Press the function key 'Edit...'.
2
The job editor opens with the settings of the initial mailbox job.
If necessary, follow the procedures described below.
3
These procedures help you to change the values of the print job settings.
Change the settings in the 'Basic' section
Press the function key 'Basic' (only necessary if the section is not displayed
1
after you pressed the function key 'Edit...').
[21] The 'Basic' section
[21] The 'Basic' section
Press the function key 'Print'.
2
You can define that the print is '1-sided' or '2-sided'.
Press the function key 'Staple'.
3
You can set the number of staples. Select 'No staple', '1 staple' or '2 staples'
for the print job.
The 'Print job identification' section displays the file name and the user
Note:
name. You can not change this information for a print job.
84 Océ VarioPrint 2090 User manual