Direct Part Marking Applications - Datalogic Matrix 120 Reference Manual

SOFTWARE CONFIGURATION
7

7.2.5 Direct Part Marking Applications

For Data Matrix family codes the Decoding Complexity parameter is available when
Processing Mode is set to Standard and selects the decoding algorithm according to the
printing/marking technique used to create the symbol and on the overall printing/marking
quality.
The possible selections progress from Low to Very High where Low can improve decoding
time for good print/mark quality and/or relatively normal size codes. This is the default
setting. Very High can improve the decode rate for low print/mark quality and/or small size
codes. This algorithm is much more aggressive but in general it may have longer decoding
times than the lower complexity algorithms. To minimize decoding time it is better to
select the lowest value that still guarantees good decoding.
Matrix 120 is indicated for DPM applications where the parts are marked by Laser Etching.
Various Image Filters are available to enhance Direct Part Marking applications. For more
details see the DL.CODE User's Manual.
103