On-Board Ethernet Interface; User Interface - Serial Host - Datalogic Matrix 120 Reference Manual

4

4.6 ON-BOARD ETHERNET INTERFACE

For Ethernet models, the on-board Ethernet Interface can be used for TCP/IP communication
with a remote or local host computer by connecting the reader to either a LAN or directly to a
host PC. There is no need to use a crossover adapter since Matrix 120 incorporates an auto-
cross function.
A CAB-ETH-M0x cable can be used to connect to a LAN.
On the Matrix 120 on-board Ethernet interface the following communication channels are
available:

TCP Client

TCP Server

UDP Client

FTP Client
The following Fieldbus protocols are also available over the on-board Ethernet interface:

EtherNet/IP

PROFINET IO

Modbus TCP Client
For further details refer to the Help On Line page of the Reading Phase step (Channels) and
(Fieldbuses) in DL.CODE.

4.7 USER INTERFACE - SERIAL HOST

The following table contains the pinout for standard RS232 PC Host interface. For other user
interface types please refer to their own manual.
Pin
2
3
5
58
RS232 PC-side connections
1 5
6 9
9-pin male connector
Name
RX
TX
GND
MATRIX 120™ REFERENCE MANUAL
1
14
25-pin male connector
Pin Name
3 RX
2 TX
7 GND
13
25