Restore; Replacement - Datalogic Matrix 120 Reference Manual

SOFTWARE CONFIGURATION

7.5.2 Restore

To perform a Restore:
1. From the DL.CODE Device menu, select Single Reader Restore (from file on PC).
At the end of the restore, DL.CODE shows a message indicating successful completion.

7.5.3 Replacement

CAUTION: The replacement device must be the exact same model as the
device it is replacing.
The Restore function also provides easy and secure Single Device Replacement:
1. Remove the device to be replaced.
2. Connect the new device (make sure the new device has been previously set to factory
default).
3. Run the Restore procedure by selecting Single Reader Restore (from file on PC) (see:
Restore procedure).
NOTE: In case of Backup or Restore operation failures, error messages will
be displayed in the Monitor Diagnostic page.
7
109