Direct Mounting - Datalogic XRF410N Series Application Note

XRF410N™ INSTALLATION

DIRECT MOUNTING

For Top direct applications mount the positioning bracket to the Bosch frame using the two T-
bolts and nuts through the slots in the bracket.
Figure 1 – Positioning Bracket Mounting to Frame
Next, install the front mounting bolt so that the XRF410N rests on the positioning bracket.
This allows positioning to be done without having to physically support the weight of the
XRF410N.
Figure 2 – XRF410N Mounting to Positioning Bracket
Now insert the back mounting bolt and position the plate into one of the pre-defined slots
corresponding to the correct application angle. The angles are marked on the positioning
bracket. The standard TOP installation is 15°.
7