Step 4B - Usb Device Discovery - Datalogic Matrix 120 Reference Manual

RAPID CONFIGURATION
STEP 4B – USB DEVICE DISCOVERY
NOTE: USB device discovery on a PC using Windows XP SP3 requires
particular attention. See par. 9.2 for more information.
The following configuration procedure assumes that a laptop computer running DL.CODE is
connected to a Matrix 120 factory default reader through the USB port (CAB-1021). See Step
1 – Connect the System.
1. After the reader is connected to the USB port and boots up successfully, from DL.CODE,
click the Getting Started button to discover it. The unit will be shown in the network
Online Devices list. Matrix 120 devices connected through the USB interface will not
be shown in the Serial Devices list.
2. Find your device in the list by matching its serial number (SN). The USB driver creates a
virtual Ethernet connection with an IP address that cannot be modified. In fact, it is easy
to see the unit in the list because it is the one without a wrench
modifying the IP parameters).
1
icon (used for
13