Datalogic Matrix 120 Reference Manual page 32

1
Code Setup
1. Click on the Code Setup button. By default, the Data Matrix ECC 200 symbology is
enabled. If this symbology is among those in your application it will be shown in the
image display with its code symbology name and a small green box around it indicating it
is decoded.
NOTE: The large green box for each symbol indicates the code localization
area which by default is equal to the maximum FoV. It can be resized and
moved by dragging its borders with the mouse. The code must be found
within this area in order to be decoded.
2. Add your application specific codes to the Code Settings by selecting them from the icons
over the Configuration Parameters tree area. If the Data Matrix symbology is not used,
then delete it from the Code Settings with the
If you don't know the code type, you can use the Code Autolearn feature by clicking on
2 See the DL.CODE User's Manual for details.
the icon.
3. For each code symbology set the relative parameters according to your application.
2
The Code Autolearn procedure will not recognize the following symbologies: Pharmacode, MSI, Standard 2 of 5, Matrix 2 of 5.
20
MATRIX 120™ REFERENCE MANUAL
icon.