E 10 Programming Errors (Settings) - Electrolux T4650 Service Manual

Service
manual
E 10 - Programming errors - (Settings)
Error description
This error occurs when the parameter set-up is inconsistent.
Note! When resetting the circuit board the user adjusted programs disappear and need
reprogramming.
The dryer stops operating.
Error analysis
1. Enter the service
program.
Set parameter 4.06
to "1" to restore all
factory settings.
Alle user-desired
programing will be
overwrighted.
Exit programming
mode and attempt to
operate the dryer.
487 05 40 31
12. Error codes
Does the E10 return?
YES
Replace the PCB
Re-enter user-desired parameter
NO
settings (time per push/coin, for
example). These are erased
when factory defaults are
restored.
12
12.1