Machine Settings - Electrolux EDH 97961 W User Manual

COTTON CUPBOARD DRY
COTTON IRON DRY
SYNTHETICS CUPBOARD DRY
1) different loading volume data may be needed in some countries as a result of different measuring methods
2) in accordance to EN 61121
3) hints for test institutes: cycle has to be checked in accordance to EN 61121

MACHINE SETTINGS

Setting
Buzzer permanent
on/off
1)
Water hardness
1) Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to
geographical locations thus varying its conductivity values. Relevant variations of the conductivity of the water
compared to those prefixed by the factory could slightly influence the residual humidity of the laundry at the end of
the cycle. Your dryer allows you to regulate the sensitivity of the drying sensor based on conductivity values of the
water.
3)
3)
3)
The alarm is by default always off. To set permanent alarm on (off):
1. Turn the programme selector to any programme.
2. Press simultaneously the Dryness (Droogtegraad) and Long anti-crease
(Lange anti-kreuk) buttons and hold down for approx. 5 seconds.
1. Turn the programme selector to any programme.
2. Press simultaneously the Long anti-crease (Lange anti-kreuk) and Start/
Pause (Start/Pauze) buttons and hold down for approx. 5 seconds.
3. Press the Start/Pause (Start/Pauze) button until you set desired level:
- low conductivity <300 μS/cm
- medium conductivity 300-600 μS/cm
- high conductivity >600 μS/cm
4. To memorize setting press simultaneously the Long anti-crease (Lange
anti-kreuk) and Start/Pause (Start/Pauze) buttons or turn knob to
position
1.85/ 140 (7 kg load pre-drained at 1000 rpm)
1.57/ 123 (7 kg load pre-drained at 1400 rpm)
1.39/ 110 (7 kg load pre-drained at 1000 rpm)
0.58/ 45 (3 kg load pre-drained at 1200 rpm)
Implementation
electrolux 69
off