Description - Electrolux T4650 Service Manual

Service
manual
Error

Description

code
E 03 Inlet air - Sensor has short-circuited The thermistor element measuring the air
inlet temperature to the drum, or the wiring to the sensor has shorted.
E 04 Outlet air - Sensor has short-circuited The thermistor element measuring the air
outlet temperature from the drum, or the wiring to the sensor has shorted.
E 05 Fan motor Motor 1: The thermal protection switch in the motor, or its harness, is
open.
E 06 Drum motor – Motor 2: The thermal protection switch in the motor, or its harness, is
open.
E 07 Option
Inlet and Outlet air protection thermostats One of the proctection thermostats has
E 08
opened due to overheating.
E 09 Option
E 10 Setting Programming error / incorrect or missing parameter(s).
E 11 Drying error Maximum allowable RMC time exceeded (non-coin operated models
only).
E 12 Drying error Maximum allowable Autostop time exceeded (non-coin operated
models only).
E 13 Drying error - Requested drying time is longer than maximum allowed.(dryer
connected to a payment system).
E 14 Gas error - A flame was not detected on gas heated dryers.
E 15 Vacuum switch The vacuum switch/pressostat does not shut within 12 seconds after
the dryer is started.
E 16 Vacuum switch The vacuum switch/pressostat was already closed when an attempt
to start the dryer was made.
E 17 Input sensor disconnected The inlet thermistor or wiring to the thermistor is open.
E 18 Output sensor disconnected The outlet thermistor or wiring to the thermistor is
open.
E 19 Option Not in use.
E 20 CMIS out of operation The dryer is put out of order in the PC programme.
E 21 CMIS com board poll error The PC does not poll the dryer within the time out.
E 22 LM10 com board poll error The PC does not poll the dryer within the time out.
All error codes are registered in the error log.
487 05 40 31
12. Error codes
12
12.5