Electrolux T4650 Service Manual page 58

12
E 13 - Drying error, dryer connected to a payment system
Error description
Error code E1 occurs with Payment systems where the customer or system has
requested a longer drying time than the allowed 90 minutes (factory setting on the dryer).
Error code is not displayed but is registered in the error log.
Error analysis
1. Which type
of payment
system?
CP ESS
Is the
connection
between P22
on PCB and the
payment system
disconnected?
12.16
12. Error codes
LM10
Incorrect payment system
setup (Max. 90 min.)
Check that there are no
YES
errors on the connected
payment system or
harness and correct these.
Incorrect payment system
NO
set-up (max. 90 min.) or
defective PCB.
Service
manual
487 05 40 31