Changing Factory Settings - Electrolux T4650 Service Manual

Service
manual

Changing factory settings

In order to clarify things a step by step instruction of how to move within a main group
follows.
Based on an example the instruction shows how to change the residual moisture factory
setting in program 4 (See Overview of factory setting Group 7).-
Start
1. Switch the user module to programming mode (See section ).
2. Move to Area B (See "To Access Area B" in group 2 ).
. Step forward using
4. Press Enter
5. Step forward from 7 01 using
Note! The factory setting is displayed.
6. Press Enter
Note! The factory setting flashes and is changeable.
7. Step forward using
8. Accept the setting using
When the programming has been completed, move the switch back to normal position.
Or if further changes are to be carried out
9. Press Return
10. Press Return
11. Press Up or Down
487 05 40 31
4. Programmes
to 7_ _
to enter subgroups within main groups 7 01
to 7 04 and then press Enter
P
till the setting is reached.
All values are stored when the display stops
flashing.
to Subgroup 7 04.
to Main group 7 _ _.
P
depending on the Main group number in
which changes are to be carried out.
487 22 93 40.00
487 22 93 40.00
4
4.5