Fine Adjustment Of The Laser Marking Projector; Adjusting The Light Axis Of The Laser Marking Projector - JUKI MEB-3200 Engineer's Manual

(9) Disassembling the marking light
1. Insert 24-6V converter ! 1 into converter installing plate ! 2 and fix it with 24-6V converter setscrews
! 3 .
2. Fix converter installing plate !2 to an optional place to the bottom side of the mchine table with
converter installing plate setscrew !4 .
3. Connect pin !1 - a (White color) of 24-6V converter !1 to No. 40 of the solenoid valve cable connector
(CN80) and pin !1 - b (Black color) to No. 35 of the solenoid valve cable connector (CN80).
4. Connect connector !1 - c of 24-6V converter !1 to connector 1-b of laser marking projector 1.
5. Bind the excess cables of laser marking projector 1 snd 24-6V converter !1 together with other
cables using the clip band supplied with the machine.
To the bottom side of
the machine table
!2
!4
!1 -c
To the laser marking projector

(10) Fine adjustment of the laser marking projector

1) Adjusting the light axis of the laser marking projector

Adjust so that the laser beam coming out from the laser marking projector 1 should be vertical to the
top face of the machine bed.
1
Procedures of disassembling/assembling
!3
To the bottom side of
the machine table
!1 -a
White
color
Black
color
!4
!1
Standard Adjustment
3
88
−
1
3
5
!1 -b
35
−
CN80
2
4
6
40