Replacing Procedure Between Double-Welt And Single-Welt; Fine Adjustment Of The Position Of Garment Body Clamp - JUKI APW-895/IP-420 Instruction Manual

7. rEPLAcING ProcEDurE BEtWEEN DouBLE-WELt AND SINGLE-WELt

cAutIoN
:
To prevent accidents caused by abrupt start of the sewing machine, start the work after turning OFF
the power.
(1) Replacing procedure between double-welt and single-welt
B

(2) Fine adjustment of the position of garment body clamp

1 , 3
Garment body
clamp (left)
B
2
A
1 Turn ON the power and advance the clamp foot.
A
2 Press button
3 When button B is pressed, the left garment body clamp operates
C
between nsde and outsde alternately. When button C s
pressed, the rght garment body clamp operates between nsde
and outsde alternately.
Select the position of left and right garment body clamps In
accordance wth the sewng type.
In addition, press buttons B and C to operate the garment body
clamp between inside and outside at the time of fine adjustment
of the position of garment body clamps which is explained later.
Garment body
clamp (right)
A B
In case of the long and wide type, changeover of
double-welt and single-welt cannot be performed with the
clamp foot advanced.
A to display the type of welt setting screen.
• Fine adjustment of double-welt type
1 Move the position of garment body clamp to
outsde (drecton B) on the panel.
2 It is possible to perform the fine adjustment of
the position of garment body with adjustment
knob for double-welt A .
Move t clockwse to outsde (drecton B) and
counterclockwise to inside (direction A).
3 Move the position of garment body clamp to
inside (direction A) on the panel and confirm the
poston.
− 103 −