JUKI MEB-3200 Engineer's Manual page 112

No. Function
E1 TG position at sewing feed end
E2 TG position at sewing feed center
E3 TG position at sewing feed start
E7 Offset value of needle thread tension
E8 Offset value of looper thread tension
F4 TG position at straight bar feed end
F5 TG position at straight bar feed center
F6 TG position at straight bar feed start
F9 Type setting
Description
TG position at feed end (When No. E0 is 0.)
TG position at feed center (When No. E0 is 1.)
TG position at feed start (When No. E0 is 2.)
Offset amount of setting in terms of output value of needle
thread tension
Offset amount of setting in terms of output value of looper
thread tension
TG position of straight bar feed end in parallel section
(When E0 is 0.)
TG position of straight bar feed center in parallel section
(When E0 is 1.)
TG position of straight bar feed start in parallel section
(When E0 is 2.)
Setting of motion according to the type of machine
108
− −
Standard value Setting range
41 1 to 45 Number of
times of TG
S, R types : 18 1 to 45 Number of
J, C, T types : 27 times of TG
13 1 to 45 Number of
times of TG
70 0 to 255
80 0 to 255
41 1 to 45 Number of
times of TG
27 1 to 45 Number of
times of TG
13 1 to 45 Number of
times of TG
0 : S type (domestic), 0 to 7
1 : J type (domestic),
2 : R type (domestic),
3 : S type (export),
4 : J type (export),
5 : R type (export),
6 : C type, 7 : T type
Unit Level
2
2
2
– 2
– 2
2
2
2
– *