JUKI MEB-3200 Engineer's Manual page 167

Adjustment Procedures
3) Plural times selection
1. Set the operation pattern of the cloth cutting knife.
2. The pattern can be set with RIGHT
key ! 2 .
When using knife holder without step : 0 or 1
When using knife holder with step
[In case of using the knife holder with step, the knife operation
may be more than the case of using the knife holder without
step at the time of the same cutting length.]
3. The order of operation of the cloth cutting knife is shown in the
order of 1, 2, 3 and 4.
(Caution) In case of using the knife holder with step, be careful
of the thickness of material. (In case of thick material, not
only the eyelet buttonhole but also the straight portion may
be cut.)
key ! 1 or RIGHT
: 1, 2 or 3
163
− −
Results of Improper Adjustment