Replacing Procedure Between Double-Welt And Single-Welt; Fine Adjustment Of The Position Of Garment Body Clamp - JUKI APW-896/IP-420 Instruction Manual

7. REPLACING PROCEDURE BETWEEN DOUBLE-WELT AND SINGLE-WELT

CAUTION
:
To prevent accidents caused by abrupt start of the sewing machine, start the work after turning OFF
the power.
(1) Replacing procedure between double-welt and single-welt
B

(2) Fine adjustment of the position of garment body clamp

1 , 3
Garment body
clamp (left)
B
2
A
1 Turn ON the power and advance the clamp foot.
A
2 Press button
3 When button B is pressed, the left garment body clamp operates
between nsde and outsde alternately. When button C s
pressed, the rght garment body clamp operates between nsde
C
and outsde alternately.
Select the position of left and right garment body clamps In
accordance wth the sewng type.
In addition, press buttons B and C to operate the garment body
clamp between inside and outside at the time of fine adjustment
of the position of garment body clamps which is explained later.
Garment body
clamp (right)
A B
A to display the type of welt setting screen.
• Fine adjustment of double-welt type
1 Move the position of garment body clamp to
outsde (drecton B) on the panel.
2 It is possible to perform the fine adjustment of
the position of garment body with adjustment
knob for double-welt A .
Move t clockwse to outsde (drecton B) and
counterclockwise to inside (direction A).
3 Move the position of garment body clamp to
inside (direction A) on the panel and confirm the
poston.
− 107 −