Power Supply - Ecom EN2 Operating Instructions Manual

4. Power Supply

Used accumulators can either be returned
to us or brought to recycling stations of
public waste disposal companies
respectively to stores selling accumulators!
The ecom-EN2 comes with an external charger. The analyser can
also be powered via the internal accumulator for a while (6 V; 3.8 Ah).
The accumulator recharge should be started when the instrument
requires to (acoustical warning and display indication). The
accumulator charging stand can be checked looking at the voltage
indication on the display (menu "Control" - Info key). The accu warning
is activated when the value „Accu" is smaller than 5.7 V.
By 5.4 V the power operation via accu is no more possible; the instrument
must be further powered via the external charger.
5. Data Memory
The multi-media card enables the storage of punctual measurements;
the gathered values are written in a text file (J2KDV.txt). Data format
information is to be found in the appendix. The files can be transferred
to a PC via a card reader.
The following conditions must be fulfilled for using a multi-media card:
- minimal card volume 32 MB - max. 2 GB
- card formatted on 16 bit FAT
- SD or MM card from rbr
- PC with card reader from rbr
- or from the manufacturers Belkin and SanDisk
ecom-EN2 Page 7