Status Bar; Figure 5 Status Bar - Honeywell 900 User Manual

Features
Touch screen

Status bar

The status bar is always visible at the bottom of all menus and displays.
1
Button
1 Data Log indicator/Data Log menu button.
Gray text when no data logging is occurring on the Control Station.
When data logging is occurring, the icon becomes colorful and the
text becomes black.
2 Diagnostic indicator.
Gray text when there is no controller diagnostic present.
When a controller diagnostic is present, the button flashes.
3 Alarm indicator.
Gray text when there are no active alarms.
When there is an active alarm present (either acknowledged or
unacknowledged), the white background turns red and the icon
becomes colorful and the text becomes white.
When there are any unacknowledged alarms, the button flashes.
When all alarms become acknowledged, the flashing stops.
4 Event indicator/Alarm and Event Summary button.
Gray text when no event is present.
When an event occurs, a description appears in black text and the
background changes to a pale yellow.
5 Controller mode, time and date.
6 Language of displayed text is indicated by flag icon.
10
2
3

Figure 5 Status bar

Description
900 Control Station User Guide
4
Touch to go to Data Log
menu. See page 64.
Touch to go to System
Diagnostics page. See page
36.
Touch to go to Alarms
console or Alarm Group
display depending on how the
Control Station was
configured (see Station
Designer manual section on
Alarms). Here all alarms are
displayed, with buttons that let
you mute and acknowledge
alarms.
Note: To see alarm history, go
to Alarm and Event Summary.
Touch to go to Alarm and
Event Summary, where they
can be viewed or cleared.
Touch to go to Controller
Setup. See page 19.
Touch to go to Language
Setup. See page 68
5
6
Function
Revision 9
May 2014