Alternator Setup Display; Alternator Edit Setup Display - Honeywell 900 User Manual

Process Displays
Alternator

Alternator Setup display

Touch the blue title bar to edit the setup parameters.
Item
Input Status
Output Status
Output Sequence
Advance
Edit

Alternator Edit Setup display

Item
Make/Break
Max Out
106
On or Off.
Blank – Normal operating output (no designation)
DNR – Device Not Ready (see Alternator Operator display for example)
Integer between 0 and 16
"0" indicates the output is not in the Output sequence.
Advances the output sequence. Not available for style DIRECT.
Select to edit the sequence. See Alternator Edit Setup.
MAKE – (Make before Break) Next output in the sequence is activated
before deactivating an output.
BREAK – (Break before Make) The output is removed before advancing
the sequence and activating the next output.
MAKE/BREAK is READ ONLY.
Maximum number of outputs used.
900 Control Station User Guide
Alternator Setup display
Description
Description
Revision 9
May 2014