View/Edit Sequence - Honeywell 900 User Manual

Sequencers

View/Edit Sequence

View/Edit Sequence
This display lets you edit parameters of the selected sequence. Edits affect only the currently working
sequence, not the sequence in memory, unless you save the sequence.
ATTENTION
Sequence must be in READY state to edit the values on this display.
Item
View/Edit Steps button
Sequence Information
Sequence number
Sequence name
Sequence Desc
Jog to Step
Time Units
144
Accesses View/Edit Sequence Steps (page 145) where you can edit each step.
Memory location of the sequence that is being run by the Sequencer.
Name of the selected sequence.
Description of the sequence.
When the sequencer's JOG input is triggered, the sequencer will jump to the start
of this step then continue.
Hours or minutes.
900 Control Station User Guide
Description
Revision 9
May 2014