Honeywell 900 User Manual page 84

Main Menu
Data Logging
Touching a batch group button that has a batch running retrieves the details for that batch:
Touching a batch group button that does not have a batch running retrieves the batch header display so that
the identification details of the next batch can be entered. Note that in the picture which follows, the values
entered from the last batch were retained. This is Data Logger property Retain Header in Station Designer
under the Data Logger's Groups tab, so the field values shown are not empty.
72 900 Control Station User Guide
View Batch Groups & View Batch Status
Revision 9
May 2014