Format Memory Device; Station Setup; Station Status; Station Comm Ports - Honeywell 900 User Manual

Main Menu
Station Settings

Format Memory Device

Lets you format CompactFlash or USB device.
Note that the Control Station uses the FAT16 file system. You may achieve better performance if the
memory device is formatted on the Control Station as opposed to your computer.

Station Setup

Lets you:
•
Change languages
• Adjust display brightness
•
Calibrate the touch screen
•
Test the touch screen
• Test the soft membrane keys left of the display
•
Clean the screen – this disables the touch screen. Use when cleaning the screen or when replacing the
optional protective film that covers the screen.

Station Status

Shows the status of the Control Station.
• Versions of boot loader, firmware, application
• Path and name of HC900 configuration file being monitored by the Control Station
• Time and cause of last several Control Station restarts

Station Comm Ports

Shows status of the Control Station's communication ports (Ethernet, RS232 program, RS232 Comm,
RS485).

Change Passwords

Lets you change user passwords.

Language Menu Selection

Lets you change the language on the Control Station UI. Use one of the following methods to change the
language.
• Go to Station Setup Menu > Languages.
or
• Click the flag icon present on the screen.
62 900 Control Station User Guide
Format Memory Device
Revision 9
May 2014