Roland udk20 Manual page 96

Start-up
The UP key leads to the following menu item:
system param. 13
sensor demagnet.
Fig. 71: De-magnetizing the sensor
Here the sensor will be de-magnetized.
The UP key leads to the following menu item:
system param. 13
EXIT
Fig. 72: Exiting the factor diagnosis section
The ENTER key will exit the factor diagnosis section.
System parameter: Indication of Type of unit, Software and Hardware
UDK20-2PW-B-0(2)
SW:01
Fig.. 73: Indication of Type of unit, Software and Hardware
Code:
UDK20 Type of unit
2PW Version with 2 sensors
B Version B
O Version Opto coupler
System parameter 14: Indication of system version.
system param. 14
VERSION: BO
Fig. 74: Indication of the system version
This factory setting must not be changed!
Pos: 58 /Doppelblech/Geräte/UDK20/7 Inbetriebnahme/Datensicherung (RS232) @ 1\mod_1310637107451_501.doc @ 9560 @ 2 @ 1
96
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series UDK20
HW:01
Manual
(2) 2 sensors connected
SW Software version
HW Hardware version
B0048991 / Rev. 1.3