Roland udk20 Manual page 25

Manual
Double Sheet Detector R1000 series UDK20
System description
B0048991 / Rev. 1.3
"Output level"
Sets the output voltages for outputs 0-,1-,2-sheet. Default setting is 0 V DC.
"Diagnosis factor"
Diagnosis of the factors located during the Teach-In. No default setting.
"W-Diagnosis"
Diagnosis of the measuring values for NF material type. No default setting.
"UDK20-x-x-S(-FP)" or "UDK20-2PW-x-x-S(-FP)
"SW:xx HW:xx"
Identification of unit. Need to be at hand for telephone support.
"Version"
Factory setting! Do not change!!!
25
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33