Sensors And Accessories; Cables - Roland udk20 Manual

Order data
12.3

Sensors and accessories

Order information
PW42AGS
SH42GS
SHS42G-FB
SHS42GS
SHX42
SHX42-STRAP-80
SHX-AZ2-25
SP42GS
SHK
2395045
2395046
2395109
2395110
12.4

Cables

Order information
SCPWS-GG
SCPWS-GW
SVCPWS-SSBUDK10
12.5 Cable plugs and cable sockets
Order information
2276005
2276007
2276010
2277004
2277010
12.6 Other accessories
Order information
RPP
SD9KRS232D9S
Pos: 78 /Kapitelübersicht/13. Anhang @ 1\mod_1216365152421_501.doc @ 6533 @ 1 @ 1
112
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series UDK20
Description
Sensor 42 mm Ø, without cable, but with sensor plug for sensor cable connection,
sensor with threaded body M42 x 1.5 mm, 2 flat nuts
Spring loaded sensor bracket, for direct installation of sensors with threaded body M42 x 1.5
mm
Spring loaded sensor bracket, for direct installation of sensors with threaded body M42 x 1.5
mm with bellow-shaped vacuum cup, without clamping bracket
Spring loaded sensor bracket, for direct installation of sensors with threaded body M42 x 1.5
mm with vacuum cup, without clamping bracket
Spring loaded sensor bracket, for direct installation of sensors with threaded body M42 x 1.5
mm with vacuum cup
Set of belt strap for SHX42, for spring travel 80mm
Adaptor 25mm for SHX42, for 25mm clamping collar
Suction cup, for direct installation of sensors with threaded body M42 x 1.5 mm
Clamping bracket, for SH42GS, SHS42GS, SH75GS, SHS75GS, for mounting the sensor
brackets to the customer specific destacking systems
Spare rubber pad, red, for sensor bracket SHS42G-FB
Spare rubber pad, black, for sensor bracket SHS42G-FB
Spare rubber pad, for suction cup SP42GS and for sensor bracket SHS42GS and SHX42
Spare rubber lips, for sensor bracket SHS42 and SHX42 or suction cup SP42
Specification
Superflex-(C) Y PURKOMBI,
2 x 1 mm² + 4 x 2 x 0,25 mm²
Superflex-(C) Y PURKOMBI,
2 x 1 mm² + 4 x 2 x 0,25 mm²
Cable, 5 m length
Description
Cable socket, 6+3 pin, Coninvers series RC, for PW42AGS
Cable socket 90°, 6+3 pin, Coninvers series RC, for PW42AGS
Cable socket, 5 pin, Coninvers series RC, for SSBUDK10
Cable plug, 6+3 pin, Coninvers series RC, for PW42AGS
Cable plug, 5 pin, Coninvers series RC, for SSBUDK10
Description
Software for data backup
Cable for RS232 connection to PC, 3 m length
Manual
Description
Cable for connecting sensor PW42AGS to UDK20 or to
SSBUDK10, both cable ends with quick disconnect plug,
straight cable plug for connecting the control unit, straight
socket for connecting the sensor
Cable for connecting sensor PW42AGS to UDK20 or to
SSBUDK10, both cable ends with quick disconnect plug,
straight cable plug for connecting the control unit, right angle
socket for connecting the sensor
Cable for connecting UDK20 to SSBUDK10, both cable ends
with quick disconnect plug, straight cable plugs on both sides
B0048991 / Rev. 1.3