Table of Contents
Advertisement
8.
Operating Procedures
T
urn on The power
1
Press the POWER button on the BTxR.
The BTxR starts up and the LED glows RED.
Turn on the WASSP Processor.
In standard installations, the WASSP program starts
up automatically. The BTxR LED will turn GREEN
once the program has initialised.
If no dongle is found, a Dongle Error message
appears on the screen.
The program then performs a self-calibration (MODE
button turns YELLOW). When the button turns BLUE
it is ready to go.
Ensure a dongle has been plugged into the WASSP
Processor's USB port and click Retry. If this doesn't
work, remove the dongle and try plugging it in again.
T
, r
ransmiT
2
Click the MODE button to switch from STBY
(standby) to the transmit mode.
When transmitting, the transmit button animates
showing a pulse being transmitted from the vessel.
c
hoose a display mode
3
Cycle through the display layouts to choose a display
mode you want to use. Left-click to cycle forwards,
right-click to cycle backwards.
c
usTomise The
4
Click the
display to open the menu for that display.
Select any options you require.
p
erform any seafloor profiling operaTions you
5
require
56
:
:
eceive
:
s
d
:
elecTed
isplays
icon in the top-left corner of each
www.wassp.com
STATUS
POWER
You can click Cancel and run a demo file
from the Utility Panel.
Doc. P/N:
Version:
Issue Date:
WSP-009-008
V1.3
April 2014
Advertisement
Table of Contents
