Table of Contents
Advertisement
Related Documents
Document P/Number
WSP-009-009
Warnings, Cautions, and Notes
Warnings, cautions, and notes are indicated by the following icons throughout this manual:
Safety Notices
THE INSTALLER OF THE EQUIPMENT IS SOLELY RESPONSIBLE FOR THE CORRECT INSTALLATION OF THE
EQUIPMENT. WASSP LTD ASSUMES NO RESPONSIBILITY FOR ANY DAMAGE ASSOCIATED WITH INCORRECT
INSTALLATION.
Electrical Safety
► Fire, electrical shock, or equipment damage may occur if the BTxR becomes wet.
► The equipment is rated for operation at:
• BTxR
• WASSP Processor
► Make sure that the power is switched OFF at the main supply (e.g. switchboard) before beginning the installa-
tion. Fire or electrical shock may occur if the power is left ON.
► Do not open equipment covers unless you are totally familiar with the system's electrical circuits.
► Make sure all safety precautions for electrical equipment are taken when operating or servicing the equip-
ment. These to be carried out in accordance with local or national regulatory body safety regulations.
► Make sure that the transducer cannot become loosened or insecure due to the vessel's vibration.
Doc. P/N:
WSP-009-008
Version:
V1.3
Issue Date:
April 2014
Title
WMB-X230 Installation Manual
A WARNING indicates that if the
instruction is not heeded, the action
may result in loss of life or serious
injury.
A CAUTION indicates that if the
instruction is not heeded, the action
may result in equipment damage or
software malfunction.
A Note indicates a tip or additional information that could be
helpful while performing a procedure.
24 V DC
6 - 30 V DC
www.wassp.com
Operator Manual
iii
Advertisement
Table of Contents
