Table of Contents
Advertisement
6.10
The Hue or Colour Scheme of the Sonar and Single Beam acoustic displays can be
changed by using this button. The button cycles through three (3) hue presets:
Black
6.11
By default, the WASSP program runs in Day Mode. This means that the user interface
and all windows are shown with normal brightness as required during day time or bright
ambient light conditions.
If the WASSP program is being used during the night time or in reduced lighting conditions, the user
may find it more comfortable to use Night Mode. Night Mode darkens the entire user interface so that
the user is able to use the program in a darkened wheelhouse without having to allow time for the
eyes to adjust to a bright screen.
The Day/Night Mode icon is used to toggle Day Mode (normal operation) and Night Mode.
The brightness of the user interface while Night Mode is enabled can be set in the System Tab of the
System Configuration (see page 46). The selectable Night Mode brightness value ranges from 10%
(darkest) to 90% (brightest).
Adjusting the display brightness on the monitor you are using can also be used to reduce / increase
the screen brightness.
44
Hue
White
Day/Night Mode
www.wassp.com
Blue
Doc. P/N:
WSP-009-008
Version:
Issue Date:
April 2014
V1.3
Advertisement
Table of Contents
