Table of Contents
Advertisement
7.1.4 System
Snapshot Path:
►
This is the location where snapshot data is stored. To change
the snapshot path, click the
location, then click 'OK'.
HD Display Mode:
►
For monitors set to resolutions of 1920x1080 or greater, the
user can select either Acoustic and Chart (side-by-side displays),
or Single Display (Acoustic or Chart displayed one at a time).
For displays smaller than 1920x1080, the configuration is limited
to Single Display (alternating between Acoustic and Chart
displays). See Figure 25.
Brightness:
►
The level of brightness during Night Mode is adjustable via this
setting in 10% increments, between 10% and 90%. See "Day/
Night Mode" on page 44 for more information.
Bottom Factor:
►
The Bottom Factor setting sets the gain level to use below
the first seafloor return on the Single/
Triple Beam display. The gain of signals
received above the seafloor line remains
unchanged. See Figure 26 for some
examples.
Water Column Targets
►
Only targets above seafloor:
Targets recorded are those that are
positioned above the detected seafloor
line, and whose signal return exceeds the
current fish threshold (see "Fish Options"
on page 16). If no seafloor line is
detected, no targets will be recognised.
All Targets in Ping: Operation for passing
all water column targets through to
the charting display when there is no
seafloor return. Used for deep water operation where no seafloor line is detectable and the user
wants to collect water column targets.
NB: When the Water Column Targets is set to "All Targets in Ping", ALL DETECTIONS including
any seafloor returns with signal strength above the fish threshold will be sent to the chart display
as fish targets. See "Fish Options" on page 16 for further information on the fish threshold.
46
button and browse to the new
Bottom Factor of 100%
www.wassp.com
Acoustic Display
Acoustic / Chart
(toggleable)
Figure 25. Display Mode Options
Bottom Factor of 20%
Figure 26. Bottom Factor examples
Doc. P/N:
Version:
Issue Date:
Chart Display
WSP-009-008
V1.3
April 2014
Advertisement
Table of Contents
