Table of Contents
Advertisement
Shallowest profile
reading
Deepest
profile reading
Doc. P/N:
WSP-009-008
Version:
V1.3
Issue Date:
April 2014
Show Profile
When this button is enabled, the Profile Window is displayed.
The Profile Window will show a profile of the detected seafloor
Window
between the two points determined by the 'Add Measure' tool.
The mouse pointer can be used to determine the depths at points
along the profile
Distance along profile from
measure point #1 to cursor
Figure 12. Profile Window
3d m
Enabling this button will set the active 2D display to be the
aster
master of the 3D display. This means that the 3D display
will be drawn dependant on how the 2D display is setup
(including the draw distance and map resolution of the 2D
display).
i.e. If the 2D display is showing colour depth, the 3D display
will show colour depth. See the example in Figure 13.
Cursor showing depth
reading on the profile
Figure 13. 3D Master
www.wassp.com
Operator Manual
C ha rt Di s pla y Mo des
Depth difference
between the shallowest
and deepest points on
the profile
Close the Profile
Window
3D Master Enabled -
the 3D display above
is linked to this 2D
display.
29
Advertisement
Table of Contents
