6.7
This button opens the Raw Info form which is used for diagnostic purposes to analyse
individual receiver channel signals and to look at the attitude information being used
by WASSP. This tool is used predominantly during commissioning and troubleshooting
(see section "8.1.3 Commissioning Step 3: Channel Signal Function" on page 41 of the Installation
Manual for the relevant commissioning procedure).
6.7.1 IQ Raw Data Tab
The user has the ability to zoom in on an area of the display by clicking and dragging across the
display. The zoom can be reset by double-clicking on the display, or by clicking 'Auto Zoom'.
Water
Column
Targets in
Water Column
Depth
38
Raw Signal Data
Pause the
Channel Select
display
(A-Z)
Weaker
Seafloor return
Figure 18. IQ Raw Data Signal Examples
www.wassp.com
Reset the
Enable the Key
zoom
Pulse Graph
Strong
Seafloor return
Unpause the
display
Cursor information
overlay
Vertical (Y)
scale slider
Doc. P/N:
WSP-009-008
Version:
Issue Date:
April 2014
V1.3