Wassp WMB-3230 Operator's Manual page 37

4.2.1 Configuration
The 3D Display can be configured by clicking the
Doc. P/N: WSP-009-008
Version: V1.3
Issue Date: April 2014
t B
These options effect what is shown in the Text Box overlay on the
ext Ox
main window.
►
►
v s
These options allow the vertical scale of the 3D display to be
ertical cale
changed while the horizontal scale remains unchanged - this
accentuates seafloor features.
1
This scale has a vertical:horizontal display ratio of 1:1, so the 3D
x
display and all contained features are drawn just as they would
appear under the water.
2 This scale has a vertical:horizontal display ratio of 2:1, so the 3D
x
display and all contained features are drawn twice as high as they
would appear under the water.
4
This scale has a vertical:horizontal display ratio of 4:1, so the 3D
x
display and all contained features are drawn four times as high as
they would appear under the water.
O
This menu contains options for controlling what is shown on the
ptiOns
3D display, and how it is displayed.
s s
The Show Swath button toggles the swath overlay on and off
hOW Wath
beneath the current vessel position. The swath overlay can be used
to give an indication of where the sonar is currently pinging.
n u Enabling North Up orients the 3D display to be point North.
Orth p
North Up in the 3D display can be different from the setting on the
2D display.
h u
Enabling Heading Up orients the 3D display to point the same
eadinG p
direction as the vessel. Hence, the display will rotate with the
vessel, and the vessel will always point up/into the screen.
Heading Up in the 3D display can be different from the setting on
the 2D display.
f r
Enabling Free Rotate allows the 3D display to be rotated to
ree Otate
whatever angle the user wants.
s l
Enabling this button will draw a vertical line from the vessel to the
eaflOOr ine
seafloor on the 3D display.
This feature is helpful in determining where the vessel is relative to
the seafloor data.
in the top left corner of the display window.
Depth At Cursor:
Shows the depth value at the mouse
cursor.
Speed over Ground:
Shows the vessel's speed relative to
the seafloor (calculated from GPS position).
www.wassp.com
Operator Manual
C ha rt Di s pla y Mo des
31