Table of Contents
Advertisement
7. System Configuration
The System Configuration button holds drop-down access to options, settings and
configurations that are required less frequently than items on the Main Menu or Utility
Panel. It consists of six (6) tabs,
7.1
System Tab
The System tab allows you to configure the following system-wide settings, as per the user's
requirements.
7.1.1 Units
The following units are available to choose from:
Depth:
Meters, Feet and Fathoms
►
Distance:
Meters and Feet
►
Position:
Degrees, Degrees/Minutes, Degrees/Minutes/Seconds
►
7.1.2 Language
The language of the user interface can be changed here. Select a Language from the drop-down list
and click Apply.
7.1.3 Configuration Manager
Swapping between different preset configurations can be useful. This tool can be used to store and
load configuration settings used by the WASSP program.
The Configuration Manager allows an operator to save and load complete sets of configuration
settings including all of the settings previously discussed. This allows different configurations to be
switched between in a few seconds.
Active Configuration:
►
Displays the currently active configuration. This configuration can be deleted with the 'Delete'
button.
My Configurations:
►
A list of previously saved configurations. The user can Load or Delete any configuration in the list.
The current configuration can also be restored to default settings. NB: The current configuration
will be lost unless it is saved prior to restoring defaults. Ship Setup information will be kept to
prevent the need for a new sea trial.
New Configuration:
►
The user can save the current configuration by typing a name in the box and clicking 'Create'.
The new configuration will appear in the 'My Configurations' list above.
Doc. P/N:
WSP-009-008
Version:
V1.3
Issue Date:
April 2014
List of saved configurations
The currently active
configuration
Save the current configuration by
inputting a name and clicking Create
Figure 24. Configuration Manager
Load the selected
Delete the selected
configuration
configuration
Press to reset the selected configuration
to default settings, including the ship setup
www.wassp.com
Operator Manual
Sys te m C onfigu r at io n
Restore GUI Defaults
45
Advertisement
Table of Contents
