Table of Contents
Advertisement
c
3d f
5.
Layout Selection
The WMB-X230 graphical user interface allows the user to arrange displays in many different ways.
The Main Menu houses two buttons for changing the display layouts:
Layouts can be customised in the Layout Tab of the System Configuration (see "Layout Tab" on page
54 for more information).
32
s
With Centre on Ship enabled, the chart displays will stay centred
entre On
hip
on the vessel as new position information is received.
To disable this mode, click on the icon again or pan the 2D display.
Enabling 3D fish will overlay the detected watercolumn targets on
ish
the 3D display.
These marks are coloured by intensity, so red marks are strong
echoes and blue marks are weak echoes.
The fish marks are stored on the WASSP Processor's hard-drive.
There is a finite number of fish marks which can be stored. Once
this maximum has been reached for a geographical area, the oldest
fish marks are removed.
If the "Show Depth at Cursor" option is enabled on the Chart tab
(see page page 53), moving the cursor over a 3D fish mark will
show the depth of that mark.
See "Fish Options" on page 16 for more details.
a
l
B
cOustic
ayOut
uttOn
This button will cycle through the Acoustic display layouts.
c
l
B
hart
ayOut
uttOn
This button will cycle through the Chart display layouts.
www.wassp.com
Doc. P/N:
WSP-009-008
Version:
Issue Date:
April 2014
V1.3
Advertisement
Table of Contents
