Gain Control; Range Control; Layout Selection; Power Level Control - Wassp WMB-3230 Operator's Manual

Table of Contents

Advertisement

2.5

Gain Control

2.6

Range Control

2.7

Layout Selection

2.8

Power Level Control

The transmit power level selector / indicator operates in the manual and auto modes. Initially use auto power by
signal (BLUE) until you are familiar with the operation of the unit.
Doc. P/N:
WSP-009-008
Version:
V1.3
Issue Date:
April 2014
The Gain Control adjusts the display gain of the received information.
Manually adjust by either clicking and then using the scroll wheel on the mouse,
or be using the mouse pointer to drag the knob clockwise to increase and
counter-clockwise to decrease.
Adjusts the depth range of the receiver.
The numeric display is YELLOW for manual and GREEN for automatic adjustment.
Default is green (automatic mode).
Manually adjust by either clicking and then using the scroll wheel on the mouse or
by using the mouse to drag the knob clockwise to increase and counter-clockwise
to decrease. Double clicking on the number causes the control to switch from
manual to automatic and vice versa. Automatic mode is recommended.
Acoustic Layout
These buttons cycle through preset display layout
arrangements. Each of the Sonar displays and Chart
Select
displays can be configured in different arrangements,
and those arrangements can be cycled through.
Chart Layout
Left-click to cycle forwards through the layouts, or
Select
right-click to cycle backwards.
See section "7.5 Layout Tab" on page 54 for information
on configuring the preset layouts.
Manual Mode
There are 14 transmit power levels that can be selected.
Click the increment (+) or decrement (–) buttons to
adjust between 01 to 14.
Auto Mode
Double-clicking the LED indicator selects the auto mode,
indicated by the LEDs changing to GREEN or BLUE.
GREEN automatically selects the power based on the
current depth. BLUE automatically selects the power
based on the signal level.
Consult the Power Tab of the Ship Setup Options if you
wish to change the Automatic Power settings. See "7.2.5
Power" on page 49 for more details.
www.wassp.com
Operator Manual
Ma in Men u
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wmb-5230

Table of Contents