Wassp WMB-3230 Operator's Manual page 32

Enter a number
Press to Close AND Activate
changes made to the Mark
26
s cOG When this button is enabled, the Course Over Ground of the vessel
hOW
will be overlayed on the 2D display in yellow.
The COG is calculated from the GPS position.
m
Marks are used to place a user marker at a location of interest.
arks
Press this to enable deleting the mark.
Press UPDATE to complete the process.
Figure 10. Mark Setup form
Note: If the charting displays aren't updating
the ship's position, make sure your GPS is ON.
www.wassp.com
The mark will have a yellow circle when it
is highlighted. Left clicking will bring up the
Mark Setup window. Configuring the mark
is optional.
Press to select
Mark Colour
Press to select
Mark Type
Enter Mark Name
Mark Position can
be changed
Press to Close
without saving
changes.
Doc. P/N:
Version:
Issue Date:
WSP-009-008
V1.3
April 2014