Table of Contents
Advertisement
6.9.2 Database Management
Database Management allows you to export recorded databases to an external storage location such
as a USB drive, and convert higher resolution databases to a lower resolution. This allows you to free
up hard drive space.
d
e
ataBase
xpOrt
Click on the "Manage" button on the bottom right of
►
the Database Manager window.
Select the database you want to export.
►
Click "Save Database to Disk" and select the location
►
where you want the database to be saved.
Click 'OK'
►
d
r
ataBase
eductiOn
A database on the WASSP Processor can be reduced in
size by converting it from a high resolution to a medium
resolution database. When this is done the grid size is
changed from 0.25 to 0.5 metres.
Before reducing the database, carry out the database
export as above, as all high resolution data will be lost
during the reduction process.
Click on the "Manage" button on the bottom right
►
of the Database Manager window.
Select the database you want to export. The Map
►
Grid Size of each database is shown in the window.
The space saved by carrying out the database
reduction is indicated below the database list.
Click the "Convert to 0.5m Gridding" button to
►
carry out the conversion.
Close the Database Tools window.
►
6.9.3 Database File Path
Databases will be generated in C:\WMBData\BathMaps by default. This can be changed by clicking
on the
button. Any location on any hard drive can be used and the location can be changed
whenever necessary.
6.9.4 Demo
As part of a standard WMB-X230 installation there is a small demo database which can be selected
by pressing the Demo button. When the button is green, this demo database is listed on the "Current
Viewing" side of the database list.
If the demo database is selected, the chart display will automatically go to the location of the database
for demo viewing. When the Demo button is clicked again, the chart display will return the previous
view.
The text "Demo" will be present on the main window when in demo mode.
6.9.5 Show Bookmarks
This button opens the Bookmarks List. For more information about bookmarks, see "Add Bookmark"
on page 27.
Doc. P/N:
WSP-009-008
Version:
V1.3
Issue Date:
April 2014
Be aware that if you change the database file path
while recording to a database, that database will
no longer be visible and data loss can occur.
www.wassp.com
Operator Manual
Utilit y P an el
43
Advertisement
Table of Contents
