Table of Contents
Advertisement
t
B
c
s
t
O
n
f
Advantages
Shows an instant snapshot of the area inside the 120° x 4° swath.
Ã
Shows seafloor profile and fish distribution under the vessel at the
Ã
same time.
The best tool for judging power level and side lobe suppression levels.
Ã
Shows full resolution of sonar data collected and could allow an
Ã
operator to pick up seafloor features too small to appear on the
charting displays.
Disadvantages
No history. Information from previous snapshots is not shown.
Ä
10
B
Provides the option of a Text Box to appear in the top left-hand
ext
Ox
corner of the sonar display. The text box provides X and Y axis
information on the location of the cursor within the window.
You can the place the cursor on a target and know the X and Y
distances to the target.
Click to display Text Box options.
Takes the user back one menu level.
ack
Settings for the Sonar Display which can be toggled are found
OnfiG
under this menu.
l
This button toggles the software-generated line of the profile of
eaflOOr
ine
the seafloor. The line is white, and is drawn as an overlay on the
sonar display.
B
Click this button to overlay the current Triple Beam configuration
riple
eam
onto the sonar display. The position (angle) and width of each beam
verlay
will be clearly visible. A RED mask for the port beam, grey mask for
the centre beam, and GREEN mask for the starboard beam.
Enable this to normalise the colours on the sonar display for
Ormalise
intensity based on power level, spreading and absorption loss.
Increasing the power will thus decrease the gain by a factor that
should mean the same fish echoes will be the same colour at any
power level.
O
This button opens the Fish Options window.
ish
ptiOns
See "3.4 Fish Options" on page 16 for more details.
www.wassp.com
Doc. P/N:
WSP-009-008
Version:
Issue Date:
April 2014
V1.3
Advertisement
Table of Contents
